The NG EOLO XL Ultra High Purity Nitrogen Generators are engineered to transform standard compressed air into a safe regulated supply of Nitrogen with a purity up to 99.9995%.
They are equipped with columns containing carbon molecular sieve that remove the oxygen, some hydrocarbons, moisture and carbon dioxide and subsequently release only ultra high pure Nitrogen gas.
The ZNG EOLO XL series is also equipped with a catalyst module to remove hydrocarbons (<0.1ppm).
Exclusive electronic flow control that allows to generate Nitrogen with higher purity using a smaller volume of air and consequent reducing energy costs and the maintenance of external compressor.
Continuous control of the operating parameters to maintain the system at its maximum efficiency.
The High purity NitroGen series NG RACK 4U C produce laboratory high grade nitrogen for most of the laboratory applications and equipments.
Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders.
The NG RACK 4U C doesn’t need an external source of air because it is equipped with an internal oil-free compressor and with the optional catalyst oven it is able to remove oxygen from air to less than 1 ppm and HC pollutants to less than 0.05ppm.
The available flows are: 150 cc/min and 500 cc/min.
The Ultra Pure Nitrogen is mainly used to feed ICP, ELSD, GC, FTIR and is ideal as nitrogen gas supply for
all kind of Laboratory and Chromatography applications.
The High purity NitroGen series NG RACK 5U produce laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders.
The NG RACK 5U removes oxygen from air to less than 1 ppm and HC pollutants to less than 0.05ppm (if the optional scrubber is installed). The available flows are: 600 cc/min and 1000 cc/min.
The NG RACK 5U needs an external compressed air source.
The Ultra Pure Nitrogen is mainly used to feed ICP, ELSD, GC, FTIR and is ideal as nitrogen gas supply for all kind of Laboratory and Chromatography applications.
The High purity NitroGen series NG RACK 7U produce laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders.
The NG RACK 7U removes oxygen from air to less than 1 ppm and HC pollutants to less than 0.05ppm (if the optional scrubber is installed). This generator needs an external compressed air source and it is able to produce a flow of 2000 cc/min
The Ultra Pure Nitrogen is mainly used to feed ICP, ELSD, GC, FTIR and is ideal as nitrogen gas supply for all kind of Laboratory and Chromatography applications.
NG SIRIO 10L produces laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders.
NG SIRIO is available with two smarts low noise built-in pistons compressors, 100% oil-free.
The Ultra Pure Nitrogen is mainly used to feed ICP, ELSD, GC, FTIR and is ideal as nitrogen gas supply for all kind of Laboratory and Chromatography applications.
NG SIRIO CD produces laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders.
The NG SIRIO removes oxygen from air to less than 1 ppm and HC pollutants to less than 0.1ppm (if the optional scrubber is installed).
NG SIRIO is available with two smarts low noise built-in pistons compressors, 100% oil-free.
The Ultra Pure Nitrogen is mainly used to feed ICP, ELSD, GC, FTIR and is ideal as nitrogen gas supply for all kind of Laboratory and Chromatography applications.
NG SIRIONC produces laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders.
The NG SIRIO NC removes oxygen from air to less than 1 ppm and HC pollutants to less than 0.1ppm (if the optional CH4 scrubber is installed).
The Ultra Pure Nitrogen is mainly used to feed ICP, ELSD, GC, FTIR and is ideal as nitrogen gas supply for all kind of Laboratory and Chromatography applications.
The High purity NitroGen series NG EOLO produce laboratory high grade nitrogen for most of the laboratory applications and equipments.
Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders.
The NG EOLO, once connected to an external source of compressed air, removes oxygen from air to less than 1 ppm.
The typical flows are: 250, 500, 750, 1000, 1300 and 4000 cc/min.
The Ultra Pure Nitrogen is mainly used to feed ICP, ELSD, GC, FTIR and is ideal as nitrogen gas supply for all kind of Laboratory and Chromatography applications.
The AirGen series KZA FID AIR V2 is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the KZA FID AIR V2 can purify up to 3 L/min of compressed Air and can bear a pressure up to 6.5 bar (94 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium.
The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device.
The KZA FID AIR V2 has a very simple and efficient interface. It can also be managed by the Hydrogen series KUBE is ideal to supply Hydrocarbon free Air to FID detectors.
The AirGen series RACK ZA FID is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the RACK ZA FID Air can purify up to 50 L/min of compressed Air and can bear a pressure up to 6.5 bar (94 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device.
The RACK ZA FID has a very simple and efficient interface. It can also be managed by the HydroGen series and is ideal to supply Hydrocarbon free Air to FID detectors.
The AirGen series ZA FID AIR is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID AIR can purify up to 30 L/min of compressed Air and can bear a pressure up to 7 bar (101.5 psi). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device.
The ZA FID AIR has a very simple and efficient interface. It can also be managed by the HydroGen series HG PRO and HG BASIC and is ideal to supply Hydrocarbon free Air to FID detectors.
The AirGen series ZA FID AIR C PLUS is able to remove the total hydrocarbons to less than 0.05 ppm. Very compact, the ZA FID AIR C PLUS is available with a low noise built-in pistons compressor, 100% oil-free.
The filtration of the hydrocarbons is performed using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device. The ZA FID AIR C PLUS has a very simple and efficient interface. It can also be managed by the HydroGen series HG PRO and HG BASIC and is ideal to supply Hydrocarbon free Air to FID detectors.
The AirGen series ZA-TOTAL is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. It is also able to remove other pollutant like Humidity, CO2, CO, NOx, SO2 and Hydrocarbons. Very small in size, the ZA-TOTAL can filter up to 30 L/min of compressed Air and can withstand a pressure up to 8 bar (115 PSI). The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. The hydrocarbons and CO are removed with a catalytic oven filled with palladium, the Humidity and CO2 is removed with a dual molecular sieve PSA system, NO is removed with Purafil and other components are removed with an active charcoal filter.
The AirGen series ZA-TOTAL-C is able to remove the total hydrocarbons to less than 0.05 ppm and other pollutant like Humidity, CO2, CO, NOx, SO2. ZA-TOTAL-C is available with a smart low noise built-in pistons compressor, 100% oil-free.
The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. The hydrocarbons and CO are removed with a catalytic oven filled with palladium, the Humidity and CO2 is removed with a dual molecular sieve PSA system, NO is removed with Purafil and other components are removed with with an active charcoal filter.
The AirGen series ZA TOTAL C HP is able to remove the total hydrocarbons to less than 0.05 ppm and other pollutant like Humidity, CO2, CO, NOx, SO2. ZA TOTAL C HP is available with a smart low noise built-in pistons compressor, 100% oil-free.
The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. The hydrocarbons and CO are removed with a catalytic oven filled with palladium, the Humidity and CO2 is removed with a dual molecular sieve PSA system, NO is removed with Purafil and other components are removed with an active charcoal filter.
The AirGen series ZA TOTAL HP is able to remove the total hydrocarbons to less than 0.05 ppm and other pollutant like Humidity, CO2, CO, NOx, SO2.
The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. The hydrocarbons and CO are removed with a catalytic oven filled with palladium, the Humidity and CO2 is removed with a dual molecular sieve PSA system, NO is removed with Purafil and other components are removed with an active charcoal filter.
The NitroGen series NG CASTORE XL iQ 3D PRINTING use Membrane technology.
They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 70 L/min with a purity up to 99.9%. The generator produces a continuos flow of Nitrogen with Laser grade in 24/7 production process worldwide, even under the most challenging environments to guarantee frictionless industrial use.
This NG series is equipped with a scroll built-in oil less compressor with inverter technology. The new iQ series is equipped with the innovative direct drive motor-compressor system that result in lower noise than the previous version.
The exclusive electronic flow control combined with the compressor control by the inverter allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs and increase the life time of the compressor.
Continuous control of the operating parameters of Nitrogen allows to maintain the system at its maximum efficiency.
The CASTORE XL iQ has been developed to meet specific requirements in term of gas, flow, purity and pressure for Laser applications.
The BEAM 1.0 performs in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments Beam 1.0 guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)). The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of hydrocarbons to less than 0,01 ppm, establishing a stable flow for your application. Zero-air produced in this way replaces existing stocks of synthetic air stored in high pressure bottles.
Laser Gas Generators are designed specifically to supply clean, dry, hydrocarbon-free air to be used for several applications.
LNI Swissgas recognizes the importance of having a safe, reliable and cost effective supply of high-purity Zero Air.
In addition providing flexibility to add or remove modules as your application requirements evolve over time.
