NG SIRIO produces laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders.
The NG SIRIO removes oxygen from air to less than 5 ppm and HC pollutants to less than 0.1ppm (if the optional scrubber is installed).
NG SIRIO is available with a smart low noise built-in pistons compressor, 100% oil-free.
The Ultra Pure Nitrogen is mainly used to feed ICP, ELSD, GC, FTIR and is ideal as nitrogen gas supply for all kind of Laboratory and Chromatography applications.
The self-regenerable zero air generator SONIMIX 3052/3057 is designed to supply high-purity air without the need for pressurized cylinders.
Optimized for use in Air Pollution Monitoring (APM) networks, this unit is the ideal companion to SONIMIX calibrators and gas dividers, including SONIMIX 3022, SONIMIX 6000 C2, and PermaCal systems.
SONIMIX 3052/3057 provides high-quality carrier or zero air for a wide range of gas analyzers. The unit filters, dries, and cleans ambient air from pollutants including HC, CH₄, CO, NO, NO₂, O₃, and SO₂. Air is compressed (internally), filtered, dried via a self-regenerating molecular sieve, and purified through a multistage scrubber system, including an optional hot catalysis module.
The NitroGen series NG CASTORE XS iQ are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 36l/min with a purity up to 99.9%.
This NG series is equipped with a scroll built-in oil less compressor with inverter technology.
The exclusive electronic flow control combined with the compressor control by the inverter allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs and increase the life time of the compressor. Continuous control of the operating parameters of Nitrogen allows to maintain the system at its maximum efficiency.
The CASTORE iQ has been developed to meet specific requirements in term of gas, flow, purity and pressure in LC-MS applications. It can be used for the evaporation of solvents in samples being analysed.
The NitroGen series NG CASTORE XL iQ use Membrane technology.
They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 70 L/min with a purity up to 99.9%.
This NG series is equipped with a scroll built-in oil less compressor with inverter technology. The new iQ series is equipped with the innovative direct drive motor-compressor system that result in lower noise than the previous version.
The exclusive electronic flow control combined with the compressor control by the inverter allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs and increase the life time of the compressor. Continuous control of the operating parameters of Nitrogen allows to maintain the system at its maximum efficiency.
The CASTORE XL iQ has been developed to meet specific requirements in term of gas, flow, purity and pressure in LC-MS applications. It can be used for the evaporation of solvents in samples being analysed.
The NitroGen series NG CASTORE 3G are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 99.5%. An optional channel can provide up to 26 L/min of compressed, dry and regulated air.
The NG CASTORE 3G with it’s dual Nitrogen and Air outlets has been developed to meet specific requirements in term of gas, flow, purity and pressure in LC-MS applications. It can be used for the evaporation of solvents in samples being analysed.
The NitroGen series NG CASTORE BASIC are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 99.5%.
The NG CASTORE BASIC has been developed to meet specific requirements in terms of gas, flow, purity and pressure in LC-MS applications. It can be also used for the evaporation of solvents in samples being analysed.
NG CASTORE BASIC 150 – 180 -200 Nitrogen Gas Generator
In Stock
The NitroGen series NG CASTORE BASIC are Membrane Nitrogen Generators.
They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 99%.
The NG CASTORE BASIC has been developed to meet specific requirements in terms of gas, flow, purity and pressure in LC-MS applications.
It can be also used for the evaporation of solvents in samples being analysed.
The NitroGen series NG CASTORE BASIC are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 99.5%.
The NG CASTORE BASIC has been developed to meet specific requirements in terms of gas, flow, purity and pressure in LC-MS applications. It can be also used for the evaporation of solvents in samples being analysed.
The NitroGen series NG CASTORE BASIC are Membrane Nitrogen Generators.
They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 99.5%.
The NG CASTORE BASIC has been developed to meet specific requirements in terms of gas, flow, purity and pressure in LC-MS applications.
It can be also used for the evaporation of solvents in samples being analysed.
The NitroGen series NG CASTORE DT are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 99.5%.
The NG CASTORE DT has been developed to meet specific requirements in terms of gas, flow, purity and pressure in LC-MS applications. It can be also used for the evaporation of solvents in samples being analysed.
The NitroGen series CASTORE MP 4000 are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe and regulated supply of Nitrogen with a purity up to 99.9%.
An additional channel can provide up to 40 L/min of compressed, dry and regulated air.
The CASTORE MP 4000 with its dual Nitrogen and Air outlets has been developed to meet specific requirements in term of gas, flow, purity and pressure for Agilent MP AES 4xxx series. It can be used for the evaporation of solvents in samples being analysed.
The NitroGen series CASTORE PRO are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 99.5%. An optional channel can provide up to 45 L/min of compressed, dry and regulated air.
The exclusive electronic flow control allows to generate Nitrogen with a higher purity using a smaller volume of air which results in reduced energy costs and maintenance of any external compressor. Continuous control of the operating parameters allows to maintain the system at its maximum efficiency.
The CASTORE PRO with it’s dual Nitrogen and Air outlets has been developed to meet specific requirements in term of gas, flow, purity and pressure in LC-MS applications. It can be used for the evaporation of solvents in samples being analysed.
The NitroGen series CASTORE PRO are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 99.5%.
The exclusive electronic flow control allows to generate Nitrogen with a higher purity using a smaller volume of air which results in reduced energy costs and maintenance of any external compressor. Continuous control of the operating parameters allows to maintain the system at its maximum efficiency.
The CASTORE PRO has been developed to meet specific requirements in term of gas, flow, purity and pressure in LC-MS applications. It can be used for the evaporation of solvents in samples being analysed.
The NitroGen series CASTORE PRO are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 99.5%. An additional channel can provide up to 67 L/min of compressed, dry and regulated air.
The exclusive electronic flow control allows to generate Nitrogen with a higher purity using a smaller volume of air which results in reduced energy costs and maintenance of any external compressor. Continuous control of the operating parameters allows to maintain the system at its maximum efficiency.
The CASTORE PRO with it’s dual Nitrogen and Air outlets has been developed to meet specific requirements in term of gas, flow, purity and pressure in LC-MS applications. It can be used for the evaporation of solvents in samples being analysed.
The NitroGen series NGCASTORE PRO350 are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 99.5%.
The exclusive electronic flow control allows to generate Nitrogen with a higher purity using a smaller volume of air which results in reduced energy costs and maintenance of any external compressor. Continuous control of the operating parameters allows to maintain the system at its maximum efficiency.
The CASTORE PRO has been developed to meet specific requirements in term of gas, flow, purity and pressure in LC-MS applications. It can be used for the evaporation of solvents in samples being analysed.
The NitroGen series CASTORE PRO HP are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity greater than 99.5%.
The exclusive electronic flow control allows to generate Nitrogen with a higher purity using a smaller volume of air which results in reduced energy costs and maintenance of any external compressor. Continuous control of the operating parameters allows to maintain the system at its maximum efficiency.
The CASTORE PRO HP has been developed to meet specific requirements in term of gas, flow, purity and pressure for ELSD, TOC, ICP, DSC/TGA and other applications. It can be used for the evaporation of solvents in samples being analysed.
The NitroGen series NG CASTORE XL iQ 3D PRINTING use Membrane technology.
They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 70 L/min with a purity up to 99.9%. The generator produces a continuos flow of Nitrogen with Laser grade in 24/7 production process worldwide, even under the most challenging environments to guarantee frictionless industrial use.
This NG series is equipped with a scroll built-in oil less compressor with inverter technology. The new iQ series is equipped with the innovative direct drive motor-compressor system that result in lower noise than the previous version.
The exclusive electronic flow control combined with the compressor control by the inverter allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs and increase the life time of the compressor.
Continuous control of the operating parameters of Nitrogen allows to maintain the system at its maximum efficiency.
The CASTORE XL iQ has been developed to meet specific requirements in term of gas, flow, purity and pressure for Laser applications.
The NitroGen series NG CASTORE XL iQ 50 is a Membrane Nitrogen Generator. It is engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 50 L/min with a purity up to 99.8%.
This is equipped with a scroll built-in oil less compressor with inverter technology.
The new iQ series is equipped with the innovative direct drive motor-compressor system that result in lower noise than the previous version.
The exclusive electronic flow control combined with the compressor control by the inverter allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs and increase the life time of the compressor. Continuous control of the operating parameters of Nitrogen allows to maintain the system at its maximum efficiency.
The CASTORE XL iQ 50 with its dual Nitrogen and optional UHP N2 outlets has been developed to meet specific requirements in term of gas, flow, purity and pressure of all Agilent LCMS applications.
